BTS70202EPAXUMA1 vs BTS70081EPAXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70202EPAXUMA1 par Infineon et BTS70081EPAXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70202EPAXUMA1 | BTS70081EPAXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,62 | $0,96 |
| Product Type | Smart High-Side Power Switch (dual channel) | Smart High-Side Power Switch (PROFET) |
| Technology | SMART7 (PROFET family) | — |
| Number of Channels | 2 | — |
| Configuration de sortie | High-side, 1:1 N-Channel MOSFET per channel | — |
| Continuous Load Current (per channel) | 2.5 A | — |
| Total Device Load Current | 5 A | — |
| On-State Resistance (typ, per channel) | 30 mΩ | — |
| Operating Voltage Range (Vbb) | 6 V to 18 V (load dump tolerant) | — |
| Current Limit (typ) | 12 A (selectable) | — |
| Diagnostic Output | Analog current sense (IS pin) per channel | Open-drain status / current sense |
| Protection Features | Over-current, short-circuit, over-temperature, over-voltage, reverse battery, loss of ground | Reverse battery, over-load, short-circuit, over-temperature, over-voltage clamp, ground loss |
| Input Logic Compatibility | 3.3 V and 5 V CMOS | — |
| Boîtier | PG-TSDSO-14-22 (exposed pad) | PG-TSDSO-14-22 (14-pin, exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| Plage de température de fonctionnement | -40 C to +150 C (junction) | -40 C to +150 C (Tj) |
| Packing | Tape & Reel (XUMA1 suffix) | — |
| Statut RoHS | Compliant | Compliant |
| Topologie | — | 1:1 N-Channel High-Side Switch |
| Continuous Load Current | — | 10 A |
| On-State Resistance (RDS(on) typ.) | — | 9 mOhm |
| Tension d'alimentation de fonctionnement | — | 6 V to 18 V |
| Load-Dump Survival Voltage | — | 28 V (per AEC-Q100) |
| Standby Current | — | [DATA_NEEDED: standby current in uA] |
| Current Limitation (typ.) | — | [DATA_NEEDED: IL(LIM) value] |
| Package Width | — | 3.90 mm (TSSOP-14 EP equivalent) |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| Niveau MSL | — | [DATA_NEEDED: MSL rating] |
| Lead-Free | — | Yes |