BTS70402EPGXUMA1 vs BTH60801EPLXUMA1 Vergleich
Detaillierter Direktvergleich von BTS70402EPGXUMA1 von Infineon und BTH60801EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS70402EPGXUMA1 | BTH60801EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,18 | $1,74 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Funktion | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 1 |
| Ausgangskonfiguration | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 4 V to 54 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Overtemperature, Overvoltage, Undervoltage, Short Circuit |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Betriebstemperaturbereich | -40 °C to +150 °C junction | -40 °C to +150 °C (Tj) |
| Gehäuse | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (exposed pad) |
| Montageart | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Smart High-Side Power Switch |
| Topologie | — | High-Side N-Channel MOSFET with Charge Pump |
| On-State Resistance (RDS(on)) | — | 80 mΩ (typical) |
| Continuous Load Current | — | 2.5 A |
| Nominal Board Net | — | 48 V (PROFET+ 48V family) |
| Current Limitation | — | Adjustable |
| Diagnostic Output | — | Current Sense (IS) pin |
| Input Logic | — | Active High and Active Low |
| Automotive Qualification | — | AEC-Q100 qualified |
| RoHS-Status | — | Compliant |