BTS70402EPGXUMA1 vs BTH60801EPLXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS70402EPGXUMA1 par Infineon et BTH60801EPLXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS70402EPGXUMA1 | BTH60801EPLXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,18 | $1,74 |
| Manufacturer | Infineon Technologies | — |
| Part Family | PROFET+2 (BTS70xxx series) | — |
| Fonction | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 1 |
| Configuration de sortie | High-side, N-channel MOSFET | — |
| Continuous Load Current per Channel | 3.5 A (typical) | — |
| On-State Resistance (Ron) per Channel | 65 mOhm typical | — |
| Operating Voltage Range | 6 V to 18 V nominal (load-dump tolerant to 40 V) | 4 V to 54 V |
| Logic Supply Voltage | 3.3 V / 5 V compatible MCU I/O | — |
| Protection Features | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection | Overtemperature, Overvoltage, Undervoltage, Short Circuit |
| Diagnostic Interface | SPI status register, current-sense feedback | — |
| Plage de température de fonctionnement | -40 °C to +150 °C junction | -40 °C to +150 °C (Tj) |
| Boîtier | PG-TSDSO-14 (exposed thermal pad) | PG-TSDSO-14 (exposed pad) |
| Type de montage | Surface Mount | Surface Mount |
| AEC-Q100 Qualification | Qualified (automotive grade) | — |
| RoHS Compliance | Compliant | — |
| Product Type | — | Smart High-Side Power Switch |
| Topologie | — | High-Side N-Channel MOSFET with Charge Pump |
| On-State Resistance (RDS(on)) | — | 80 mΩ (typical) |
| Continuous Load Current | — | 2.5 A |
| Nominal Board Net | — | 48 V (PROFET+ 48V family) |
| Current Limitation | — | Adjustable |
| Diagnostic Output | — | Current Sense (IS) pin |
| Input Logic | — | Active High and Active Low |
| Automotive Qualification | — | AEC-Q100 qualified |
| Statut RoHS | — | Compliant |