BTS710336ESAXUMA1 vs BTG70902EPLXUMA1 Vergleich
Detaillierter Direktvergleich von BTS710336ESAXUMA1 von Infineon und BTG70902EPLXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
BTG70902EPLXUMA1 - 2A PROFET+2 12V Smart High-Side Switch | Infineon
BTG70902EPLXUMA1 ✓ AktivSpezifikationsvergleich
| Parameter | BTS710336ESAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,45 | $0,99 |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | 1 |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: Vbb operating range min/max] |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| Gehäuse | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Technology | SMART7 (SMART power) | — |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperaturbereich | -40C to +150C (Tj) | — |
| RoHS-Status | Compliant | Compliant |
| Family | SPOC+2 | — |
| Product Family | — | PROFET+2 12V |
| Funktion | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| Ausgangskonfiguration | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| Strombegrenzung | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| Betriebs-Sperrschichttemperatur | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL-Level | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |