BTS710336ESAXUMA1 vs BTG70902EPLXUMA1 비교
다음의 상세 나란히 비교: BTS710336ESAXUMA1 제조: Infineon 및 BTG70902EPLXUMA1 제조: Infineon. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | BTS710336ESAXUMA1 | BTG70902EPLXUMA1 |
|---|---|---|
| 브랜드 | Infineon | Infineon |
| 카테고리 | Power MOSFET Drivers | Power MOSFET Drivers |
| 수명 주기 상태 | 활성 | 활성 |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $2.45 | $0.99 |
| Product Type | SPI high-side power switch (SPOC+2 family) | — |
| Number of Channels | 6 (4 x 1.5 A + 2 x 3 A) | 1 |
| On-State Resistance (1.5 A channels) | 70 mOhm (typical) | — |
| On-State Resistance (3 A channels) | 22.5 mOhm (typical) | — |
| Maximum Channel Current (1.5 A channels) | 1.5 A | — |
| Maximum Channel Current (3 A channels) | 3 A | — |
| Operating Voltage Range | [DATA_NEEDED: Vbb operating range] | [DATA_NEEDED: Vbb operating range min/max] |
| Logic Interface | SPI (daisy-chain capable, 3.3 V and 5 V compatible) | — |
| Diagnosis | Open-load, short-to-battery, short-to-ground, overtemperature, overload | — |
| Protection Functions | Overload, short-circuit, overtemperature, overvoltage | — |
| 패키지 | PG-TSDSO-24-42 (24-pin TSSOP with exposed pad) | PG-TSDSO-14 (exposed pad) |
| Technology | SMART7 (SMART power) | — |
| 실장 유형 | Surface Mount | Surface Mount |
| 동작 온도 범위 | -40C to +150C (Tj) | — |
| RoHS 상태 | Compliant | Compliant |
| Family | SPOC+2 | — |
| Product Family | — | PROFET+2 12V |
| 기능 | — | Smart High-Side Power Switch |
| Input-to-Output Ratio | — | 1:1 |
| 출력 구성 | — | N-Channel High-Side |
| Continuous Load Current | — | 2 A |
| Nominal Operating Voltage | — | 12 V (automotive bus) |
| On-State Resistance (Ron) | — | [DATA_NEEDED: Rdson typ/max in mohm] |
| 전류 제한 | — | Fixed (value not specified in retrieved data) |
| Protection Features | — | Overcurrent, Short-Circuit, Over-Temperature (latch), Over-Voltage, Under-Voltage Lockout, Reverse Battery |
| Diagnostic Output | — | DEN pin (current sense / fault flag) |
| Enable Input | — | IN pin (active-high) |
| Channel Select | — | DSEL pin |
| Slew Rate Control | — | Yes (internal, for EMI) |
| 동작 접합 온도 | — | -40 C to +150 C |
| Automotive Qualification | — | AEC-Q100 (PROFET+2 family targeted at automotive) |
| MSL 레벨 | — | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] |