BTS711L1XUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTS711L1XUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS711L1XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,65 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 4 |
| Topologie | 1:1 N-Channel High-Side | — |
| Nominal Load Current per Channel | 1.7 A | — |
| Operating Voltage Range | 4.5 V to 28 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Overvoltage Clamp (Load Dump) | 43 V | — |
| On-State Resistance R_DS(on) | 200 mΩ per channel (typical) | — |
| Standby Current | Very low (µA range, see datasheet) | — |
| Protection Features | Overload, current limit, short-circuit, thermal shutdown, overvoltage, reverse battery (with R_GND) | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Output | Current sense / status feedback | — |
| Load Type | Resistive and inductive (with fast demagnetization) | — |
| Betriebstemperaturbereich | -40°C to +150°C (junction) | -40 °C to +150 °C junction |
| Gehäuse | PG-DSO-20-31 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Family | Classic PROFET™ 12 V | — |
| Automotive Grade | AEC-Q100 qualified (PROFET family) | — |
| RoHS-Status | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Funktion | — | Smart High-Side Power Switch |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |