BTS711L1XUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS711L1XUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS711L1XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,65 | $3,18 |
| Product Type | Smart High-Side Power Switch | — |
| Number of Channels | 4 | 4 |
| Topologie | 1:1 N-Channel High-Side | — |
| Nominal Load Current per Channel | 1.7 A | — |
| Operating Voltage Range | 4.5 V to 28 V | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Overvoltage Clamp (Load Dump) | 43 V | — |
| On-State Resistance R_DS(on) | 200 mΩ per channel (typical) | — |
| Standby Current | Very low (µA range, see datasheet) | — |
| Protection Features | Overload, current limit, short-circuit, thermal shutdown, overvoltage, reverse battery (with R_GND) | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Diagnostic Output | Current sense / status feedback | — |
| Load Type | Resistive and inductive (with fast demagnetization) | — |
| Plage de température de fonctionnement | -40°C to +150°C (junction) | -40 °C to +150 °C junction |
| Boîtier | PG-DSO-20-31 (exposed pad) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Family | Classic PROFET™ 12 V | — |
| Automotive Grade | AEC-Q100 qualified (PROFET family) | — |
| Statut RoHS | Compliant | — |
| Manufacturer | — | Infineon Technologies |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Fonction | — | Smart High-Side Power Switch |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Logic Supply Voltage | — | 3.3 V / 5 V compatible MCU I/O |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |