BTS740S2XUMA1 vs BTS70402EPGXUMA1 Vergleich
Detaillierter Direktvergleich von BTS740S2XUMA1 von Infineon und BTS70402EPGXUMA1 von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | BTS740S2XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,92 | $3,18 |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Funktion | Dual-channel Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | High-Side Switch, 1:1 N-Channel | — |
| Number of Channels | 2 | 4 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | 3.3 V / 5 V compatible MCU I/O |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | — |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| Betriebstemperaturbereich | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Gehäuse | PG-DSO-20 (Power Small Outline, 20-pin) | PG-TSDSO-14 (exposed thermal pad) |
| Montageart | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | — |
| RoHS-Status | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Ausgangskonfiguration | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |