BTS740S2XUMA1 vs BTS70402EPGXUMA1 Comparaison
Comparaison détaillée côte à côte de BTS740S2XUMA1 par Infineon et BTS70402EPGXUMA1 par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | BTS740S2XUMA1 | BTS70402EPGXUMA1 |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Power MOSFET Drivers | Power MOSFET Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $1,92 | $3,18 |
| Part Number | BTS740S2XUMA1 | — |
| Manufacturer | Infineon Technologies | Infineon Technologies |
| Fonction | Dual-channel Smart High-Side Power Switch | Smart High-Side Power Switch |
| Topologie | High-Side Switch, 1:1 N-Channel | — |
| Number of Channels | 2 | 4 |
| Output Current per Channel | 4.9 A | — |
| Operating Voltage (Load) | 5 V to 28 V | — |
| Logic Supply Voltage | 3.0 V to 5.5 V | 3.3 V / 5 V compatible MCU I/O |
| Input Type | CMOS-compatible, logic ground isolated | — |
| R_DS(on) per Channel | [DATA_NEEDED: R_DS(on) typical value] | — |
| On-State Resistance (typ, per channel) | [DATA_NEEDED: R_DS(on) typical value] | — |
| Protection Features | Overvoltage, Undervoltage, Overtemperature, Short-circuit, Open-load detection | Current limit, overtemperature shutdown, overvoltage, reverse battery, short-to-ground, short-to-battery, open-load detection |
| Demagnetization | Fast active demagnetization for inductive loads | — |
| Diagnostic Output | Yes (open-load, short detection) | — |
| Standby Current | [DATA_NEEDED: I_stby typical] | — |
| Plage de température de fonctionnement | -40 °C to +150 °C (junction) | -40 °C to +150 °C junction |
| Boîtier | PG-DSO-20 (Power Small Outline, 20-pin) | PG-TSDSO-14 (exposed thermal pad) |
| Type de montage | Surface Mount | Surface Mount |
| Automotive Qualified | AEC-Q100 (PROFET family) | — |
| Statut RoHS | Compliant | — |
| Part Family | — | PROFET+2 (BTS70xxx series) |
| Configuration de sortie | — | High-side, N-channel MOSFET |
| Continuous Load Current per Channel | — | 3.5 A (typical) |
| On-State Resistance (Ron) per Channel | — | 65 mOhm typical |
| Operating Voltage Range | — | 6 V to 18 V nominal (load-dump tolerant to 40 V) |
| Diagnostic Interface | — | SPI status register, current-sense feedback |
| AEC-Q100 Qualification | — | Qualified (automotive grade) |
| RoHS Compliance | — | Compliant |