CI522 vs MFRC52201HN1,115 Vergleich
Detaillierter Direktvergleich von CI522 von NI und MFRC52201HN1,115 von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MFRC52201HN1,115 - 13.56MHz RFID Reader IC | NXP | MIFARE
MFRC52201HN1,115 ✓ AktivSpezifikationsvergleich
| Parameter | CI522 | MFRC52201HN1,115 |
|---|---|---|
| Marke | NI | NXP Semiconductors |
| Kategorie | RF Transceivers | RF Transceivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,18 | $4,10 |
| Manufacturer | Nanjing Zhongke Microelectronics | — |
| Funktion | 13.56 MHz contactless reader/writer IC | RFID Reader IC (contactless reader front-end) |
| Supported Protocol | ISO/IEC 14443 Type A | ISO/IEC 14443 A, MIFARE |
| Operating Frequency | 13.56 MHz | — |
| Maximum Data Rate | 848 Kbit/s | — |
| Versorgungsspannung | 2.3 V to 4 V | 2.5 V to 3.6 V |
| Host Interface | SPI | — |
| Built-in Antenna Driver | Yes | — |
| Hardware Data Verification | CRC and parity, on-chip | — |
| Low-Power Wake-up | Yes (configurable polling) | — |
| Gehäuse | QFN-16-EP (3x3 mm) | 32-pin HVQFN with exposed pad |
| Montageart | Surface Mount | Surface Mount |
| Betriebstemperatur | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| MSL-Level | [DATA_NEEDED: MSL rating] | — |
| RoHS-Status | Compliant (per JLCPCB listing) | EU RoHS Compliant |
| Frequency | — | 13.56 MHz |
| Host Interfaces | — | SPI, I2C, UART |
| Operating Supply (typical range) | — | 2.5 V to 3.3 V |
| Packaging | — | Tape & Reel (T/R) |
| Crypto Engine | — | Crypto-1 for MIFARE authentication |
| Version | — | MFRC522 version 1.0 |
| Transmitter Output Power | — | [DATA_NEEDED: transmitter output power] |
| Supply Current (idle/tx) | — | [DATA_NEEDED: supply current] |
| FIFO Buffer Size | — | [DATA_NEEDED: FIFO buffer size] |
| SPI Max Data Rate | — | [DATA_NEEDED: SPI max data rate] |