CI522 vs MFRC52201HN1,115 Сравнение
Подробное сравнение бок о бок CI522 от NI и MFRC52201HN1,115 от NXP Semiconductors. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
NXP Semiconductors
MFRC52201HN1,115 - 13.56MHz RFID Reader IC | NXP | MIFARE
MFRC52201HN1,115 ✓ АктивенСравнение характеристик
| Параметр | CI522 | MFRC52201HN1,115 |
|---|---|---|
| Бренд | NI | NXP Semiconductors |
| Категория | RF Transceivers | RF Transceivers |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $0,18 | $4,10 |
| Manufacturer | Nanjing Zhongke Microelectronics | — |
| Функция | 13.56 MHz contactless reader/writer IC | RFID Reader IC (contactless reader front-end) |
| Supported Protocol | ISO/IEC 14443 Type A | ISO/IEC 14443 A, MIFARE |
| Operating Frequency | 13.56 MHz | — |
| Maximum Data Rate | 848 Kbit/s | — |
| Напряжение питания | 2.3 V to 4 V | 2.5 V to 3.6 V |
| Host Interface | SPI | — |
| Built-in Antenna Driver | Yes | — |
| Hardware Data Verification | CRC and parity, on-chip | — |
| Low-Power Wake-up | Yes (configurable polling) | — |
| Корпус | QFN-16-EP (3x3 mm) | 32-pin HVQFN with exposed pad |
| Тип монтажа | Surface Mount | Surface Mount |
| Рабочая температура | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Уровень MSL | [DATA_NEEDED: MSL rating] | — |
| Статус RoHS | Compliant (per JLCPCB listing) | EU RoHS Compliant |
| Frequency | — | 13.56 MHz |
| Host Interfaces | — | SPI, I2C, UART |
| Operating Supply (typical range) | — | 2.5 V to 3.3 V |
| Packaging | — | Tape & Reel (T/R) |
| Crypto Engine | — | Crypto-1 for MIFARE authentication |
| Version | — | MFRC522 version 1.0 |
| Transmitter Output Power | — | [DATA_NEEDED: transmitter output power] |
| Supply Current (idle/tx) | — | [DATA_NEEDED: supply current] |
| FIFO Buffer Size | — | [DATA_NEEDED: FIFO buffer size] |
| SPI Max Data Rate | — | [DATA_NEEDED: SPI max data rate] |