CP2101 vs CP2102N-A01-GQFN28R Vergleich
Detaillierter Direktvergleich von CP2101 von Silicon Labs und CP2102N-A01-GQFN28R von Silicon Labs. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Silicon Labs
CP2101 - USB to UART Bridge, QFN-28, 5x5mm | Silicon Labs
CP2101 ⚠ Letzte BestellmöglichkeitSilicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ AktivSpezifikationsvergleich
| Parameter | CP2101 | CP2102N-A01-GQFN28R |
|---|---|---|
| Marke | Silicon Labs | Silicon Labs |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Letzte Kaufgelegenheit | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,55 | $2,31 |
| Funktion | USB to UART Bridge Controller | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Gehäuse | MLP/QFN-28 (5 x 5 mm) | 28-QFN (5x5 mm) with exposed pad |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Betriebstemperatur | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| RoHS-Status | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| Product Type | — | USB to UART Bridge Controller |
| Series | — | USBXpress |
| UART Interface | — | USB 2.0 UART |
| Number of UART Channels | — | 1 |
| Datenrate | — | 300 baud to 1 Mbaud |
| Supply Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Supply Voltage (VDD) | — | 3.0 V to 3.6 V |
| Internal Regulator Output | — | 3.3 V (up to ~100 mA) |
| Montageart | — | Surface Mount |
| GPIO | — | Yes (multiple, signal-configurable) |
| Reset Pin | — | RSTb (active-low hardware reset) |
| On-chip Oscillator | — | Yes (no external crystal required) |
| MSL-Level | — | MSL3 (per JEDEC J-STD-020) |
| Host Driver | — | Silicon Labs CP210x VCP driver |