CP2101 vs CP2102N-A01-GQFN28R Comparación
Comparación detallada lado a lado de CP2101 por Silicon Labs y CP2102N-A01-GQFN28R por Silicon Labs. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ ActivoComparación de especificaciones
| Parámetro | CP2101 | CP2102N-A01-GQFN28R |
|---|---|---|
| Marca | Silicon Labs | Silicon Labs |
| Categoría | Interface ICs | Interface ICs |
| Estado del ciclo de vida | Última compra | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $3,55 | $2,31 |
| Función | USB to UART Bridge Controller | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| Integrated Transceiver | Yes | — |
| Integrated Oscillator | Yes (internal) | — |
| Integrated EEPROM | Yes (programmable) | — |
| Integrated Voltage Regulator | 5 V to 3 V, up to 100 mA | — |
| UART Data Rate | 300 bps to 921.6 kbps | — |
| Modem Control Signals | RTS, CTS, DTR, DSR, DCD, RI (full) | — |
| Operating Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Regulated Output | 3.0 V to 3.6 V (3.3 V typical) | — |
| Encapsulado | MLP/QFN-28 (5 x 5 mm) | 28-QFN (5x5 mm) with exposed pad |
| Driver Support | Windows, macOS, Linux (virtual COM port) | — |
| Configuration | USB bus-powered or self-powered | — |
| Temperatura de funcionamiento | [DATA_NEEDED: operating temperature] | -40 C to +85 C |
| Estado RoHS | Compliant | Compliant |
| Bus-Powered Capable | Yes | — |
| Product Type | — | USB to UART Bridge Controller |
| Series | — | USBXpress |
| UART Interface | — | USB 2.0 UART |
| Number of UART Channels | — | 1 |
| Velocidad de datos | — | 300 baud to 1 Mbaud |
| Supply Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Supply Voltage (VDD) | — | 3.0 V to 3.6 V |
| Internal Regulator Output | — | 3.3 V (up to ~100 mA) |
| Tipo de montaje | — | Surface Mount |
| GPIO | — | Yes (multiple, signal-configurable) |
| Reset Pin | — | RSTb (active-low hardware reset) |
| On-chip Oscillator | — | Yes (no external crystal required) |
| Nivel MSL | — | MSL3 (per JEDEC J-STD-020) |
| Host Driver | — | Silicon Labs CP210x VCP driver |