CP2102N-A01-GQFN28R vs CP2101 Vergleich
Detaillierter Direktvergleich von CP2102N-A01-GQFN28R von Silicon Labs und CP2101 von Silicon Labs. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ AktivSilicon Labs
CP2101 - USB to UART Bridge, QFN-28, 5x5mm | Silicon Labs
CP2101 ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | CP2102N-A01-GQFN28R | CP2101 |
|---|---|---|
| Marke | Silicon Labs | Silicon Labs |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,31 | $3,55 |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Datenrate | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| Betriebstemperatur | -40 C to +85 C | [DATA_NEEDED: operating temperature] |
| Gehäuse | 28-QFN (5x5 mm) with exposed pad | MLP/QFN-28 (5 x 5 mm) |
| Montageart | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| MSL-Level | MSL3 (per JEDEC J-STD-020) | — |
| RoHS-Status | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| Funktion | — | USB to UART Bridge Controller |
| Integrated Transceiver | — | Yes |
| Integrated Oscillator | — | Yes (internal) |
| Integrated EEPROM | — | Yes (programmable) |
| Integrated Voltage Regulator | — | 5 V to 3 V, up to 100 mA |
| UART Data Rate | — | 300 bps to 921.6 kbps |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI (full) |
| Operating Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Regulated Output | — | 3.0 V to 3.6 V (3.3 V typical) |
| Driver Support | — | Windows, macOS, Linux (virtual COM port) |
| Configuration | — | USB bus-powered or self-powered |
| Bus-Powered Capable | — | Yes |