CP2102N-A01-GQFN28R vs CP2101 Comparaison
Comparaison détaillée côte à côte de CP2102N-A01-GQFN28R par Silicon Labs et CP2101 par Silicon Labs. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Silicon Labs
CP2102N-A01-GQFN28R - USB to UART Bridge QFN-28 | Silicon Labs
CP2102N-A01-GQFN28R ✓ ActifComparaison des spécifications
| Paramètre | CP2102N-A01-GQFN28R | CP2101 |
|---|---|---|
| Marque | Silicon Labs | Silicon Labs |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Dernier achat |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,31 | $3,55 |
| Product Type | USB to UART Bridge Controller | — |
| Series | USBXpress | — |
| USB Standard | USB 2.0 Full-Speed (12 Mbps) | USB 2.0 Full-Speed (12 Mbps) |
| UART Interface | USB 2.0 UART | — |
| Number of UART Channels | 1 | — |
| Débit de données | 300 baud to 1 Mbaud | — |
| Supply Voltage (VBUS) | 4.0 V to 5.25 V | — |
| Supply Voltage (VDD) | 3.0 V to 3.6 V | — |
| Internal Regulator Output | 3.3 V (up to ~100 mA) | — |
| Température de fonctionnement | -40 C to +85 C | [DATA_NEEDED: operating temperature] |
| Boîtier | 28-QFN (5x5 mm) with exposed pad | MLP/QFN-28 (5 x 5 mm) |
| Type de montage | Surface Mount | — |
| GPIO | Yes (multiple, signal-configurable) | — |
| Reset Pin | RSTb (active-low hardware reset) | — |
| On-chip Oscillator | Yes (no external crystal required) | — |
| Niveau MSL | MSL3 (per JEDEC J-STD-020) | — |
| Statut RoHS | Compliant | Compliant |
| Host Driver | Silicon Labs CP210x VCP driver | — |
| Fonction | — | USB to UART Bridge Controller |
| Integrated Transceiver | — | Yes |
| Integrated Oscillator | — | Yes (internal) |
| Integrated EEPROM | — | Yes (programmable) |
| Integrated Voltage Regulator | — | 5 V to 3 V, up to 100 mA |
| UART Data Rate | — | 300 bps to 921.6 kbps |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI (full) |
| Operating Voltage (VBUS) | — | 4.0 V to 5.25 V |
| Regulated Output | — | 3.0 V to 3.6 V (3.3 V typical) |
| Driver Support | — | Windows, macOS, Linux (virtual COM port) |
| Configuration | — | USB bus-powered or self-powered |
| Bus-Powered Capable | — | Yes |