CY7C65213-28PVXI vs CY7C65213-32LTXI Vergleich
Detaillierter Direktvergleich von CY7C65213-28PVXI von Infineon und CY7C65213-32LTXI von Infineon. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ Aktiv
Spezifikationsvergleich
| Parameter | CY7C65213-28PVXI | CY7C65213-32LTXI |
|---|---|---|
| Marke | Infineon | Infineon |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | USB-to-UART Bridge Controller | USB-to-UART bridge controller |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | — |
| GPIO Pins | Available (multi-function) | — |
| Gehäuse | 28-pin SSOP | 32-QFN |
| Operating Voltage | 5.0 V (VBUS-powered) | [DATA_NEEDED: operating voltage] |
| Betriebstemperaturbereich | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Montageart | Surface Mount | Surface mount |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| USB Standard | — | USB 2.0 Full-Speed |
| UART Maximum Data Rate | — | 3 Mbps |
| GPIO Count | — | 8 GPIOs |
| Serial Interface Support | — | RS232/RS422 |
| Package Dimensions | — | 5 mm × 5 mm |
| USB Suspend Support | — | SLEEP# asserted during USB suspend |
| Power Architecture | — | Fully integrated USB-to-UART bridge |
| Legacy UART Upgrade | — | Supports upgrading UART-based devices to USB |
| Betriebstemperatur | — | [DATA_NEEDED: operating temperature range] |
| UART Electrical Levels | — | [DATA_NEEDED: UART logic levels] |
| Clock or Crystal Requirement | — | [DATA_NEEDED: clock or crystal requirement] |
| USB Bus-Powered Suspend Current | — | [DATA_NEEDED: suspend current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |