CY7C65213-28PVXI vs CY7C65213-32LTXI Comparaison
Comparaison détaillée côte à côte de CY7C65213-28PVXI par Infineon et CY7C65213-32LTXI par Infineon. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ Actif
Comparaison des spécifications
| Paramètre | CY7C65213-28PVXI | CY7C65213-32LTXI |
|---|---|---|
| Marque | Infineon | Infineon |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | USB-to-UART Bridge Controller | USB-to-UART bridge controller |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | — |
| GPIO Pins | Available (multi-function) | — |
| Boîtier | 28-pin SSOP | 32-QFN |
| Operating Voltage | 5.0 V (VBUS-powered) | [DATA_NEEDED: operating voltage] |
| Plage de température de fonctionnement | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| USB Standard | — | USB 2.0 Full-Speed |
| UART Maximum Data Rate | — | 3 Mbps |
| GPIO Count | — | 8 GPIOs |
| Serial Interface Support | — | RS232/RS422 |
| Package Dimensions | — | 5 mm × 5 mm |
| USB Suspend Support | — | SLEEP# asserted during USB suspend |
| Power Architecture | — | Fully integrated USB-to-UART bridge |
| Legacy UART Upgrade | — | Supports upgrading UART-based devices to USB |
| Température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| UART Electrical Levels | — | [DATA_NEEDED: UART logic levels] |
| Clock or Crystal Requirement | — | [DATA_NEEDED: clock or crystal requirement] |
| USB Bus-Powered Suspend Current | — | [DATA_NEEDED: suspend current] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| Automotive Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |