CY7C65213-28PVXI vs FT232HL Vergleich
Detaillierter Direktvergleich von CY7C65213-28PVXI von Infineon und FT232HL von FTDI. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ Aktiv
Spezifikationsvergleich
| Parameter | CY7C65213-28PVXI | FT232HL |
|---|---|---|
| Marke | Infineon | FTDI |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,30 | $3,92 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | Up to 12 Mbaud |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | — |
| GPIO Pins | Available (multi-function) | — |
| Gehäuse | 28-pin SSOP | 48-LQFP (7x7 mm, lead-free) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Betriebstemperaturbereich | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Montageart | Surface Mount | Surface Mount (LQFP) |
| RoHS-Status | Compliant | Compliant (lead-free) |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Funktion | — | USB 2.0 Hi-Speed to UART/FIFO/SPI/I2C bridge |
| USB Speed | — | Hi-Speed USB 2.0, 480 Mb/s |
| USB Compliance | — | USB 2.0 Hi-Speed |
| Serial Modes | — | UART, FIFO, FT1248, SPI host, I2C host (via MPSSE) |
| MPSSE Clock | — | Up to 30 MHz (SPI) |
| I2C Clock (MPSSE) | — | Up to 3.4 MHz |
| Number of Channels | — | 1 |
| Supply Voltage (VCC) | — | 3.0 V to 5.25 V (from VBUS or external 5V) |
| I/O Logic Level | — | 3.3 V (5 V tolerant inputs on most pins) |
| Internal LDO | — | 1.8 V core LDO integrated |
| EEPROM | — | Internal 1024-byte user-configurable |
| Betriebstemperatur | — | -40 C to +85 C |