CY7C65213-28PVXI vs FT232HL Comparaison
Comparaison détaillée côte à côte de CY7C65213-28PVXI par Infineon et FT232HL par FTDI. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ Actif
Comparaison des spécifications
| Paramètre | CY7C65213-28PVXI | FT232HL |
|---|---|---|
| Marque | Infineon | FTDI |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,30 | $3,92 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | Up to 12 Mbaud |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | — |
| GPIO Pins | Available (multi-function) | — |
| Boîtier | 28-pin SSOP | 48-LQFP (7x7 mm, lead-free) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Plage de température de fonctionnement | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Type de montage | Surface Mount | Surface Mount (LQFP) |
| Statut RoHS | Compliant | Compliant (lead-free) |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Fonction | — | USB 2.0 Hi-Speed to UART/FIFO/SPI/I2C bridge |
| USB Speed | — | Hi-Speed USB 2.0, 480 Mb/s |
| USB Compliance | — | USB 2.0 Hi-Speed |
| Serial Modes | — | UART, FIFO, FT1248, SPI host, I2C host (via MPSSE) |
| MPSSE Clock | — | Up to 30 MHz (SPI) |
| I2C Clock (MPSSE) | — | Up to 3.4 MHz |
| Number of Channels | — | 1 |
| Supply Voltage (VCC) | — | 3.0 V to 5.25 V (from VBUS or external 5V) |
| I/O Logic Level | — | 3.3 V (5 V tolerant inputs on most pins) |
| Internal LDO | — | 1.8 V core LDO integrated |
| EEPROM | — | Internal 1024-byte user-configurable |
| Température de fonctionnement | — | -40 C to +85 C |