CY7C65213-28PVXI vs FT232RL-REEL Vergleich
Detaillierter Direktvergleich von CY7C65213-28PVXI von Infineon und FT232RL-REEL von FTDI. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ AktivSpezifikationsvergleich
| Parameter | CY7C65213-28PVXI | FT232RL-REEL |
|---|---|---|
| Marke | Infineon | FTDI |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Obsolete |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,30 | $3,55 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | 12 MHz (with optional external clock) |
| GPIO Pins | Available (multi-function) | — |
| Gehäuse | 28-pin SSOP | SSOP-28 (208 mil) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Betriebstemperaturbereich | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Montageart | Surface Mount | Surface Mount |
| RoHS-Status | Compliant | Compliant |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Funktion | — | USB to UART serial bridge |
| USB Standard | — | USB 2.0 Full Speed (12 Mbps) |
| Data Rate (UART) | — | 300 baud to 3 Mbaud |
| Supply Voltage (VCC) | — | 3.3 V to 5.25 V |
| Logic I/O Voltage | — | 1.8 V to 5.25 V |
| Supply Current (typical) | — | 25 mA |
| Betriebstemperatur | — | -40 C to +85 C |
| Anzahl der Pins | — | 28 |
| On-chip EEPROM | — | 1 KB |
| Transmit Buffer | — | 16 bytes |
| Receive Buffer | — | 16 bytes |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI |
| CBUS Pins | — | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) |
| Internal LDO | — | 3.3 V for USB transceiver |
| Drivers | — | VCP, D2XX (multi-platform) |
| MSL-Level | — | 1 |