CY7C65213-28PVXI vs FT232RL-REEL Comparaison
Comparaison détaillée côte à côte de CY7C65213-28PVXI par Infineon et FT232RL-REEL par FTDI. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Infineon
CY7C65213-28PVXI - USB-UART LP Bridge Controller 28-SSOP | Infineon
CY7C65213-28PVXI ✓ ActifComparaison des spécifications
| Paramètre | CY7C65213-28PVXI | FT232RL-REEL |
|---|---|---|
| Marque | Infineon | FTDI |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,30 | $3,55 |
| Product Type | USB-to-UART Bridge Controller | — |
| USB Specification | USB 2.0 Full-Speed (12 Mbps) | — |
| UART Data Rate | Up to 3 Mbps | — |
| UART Interface | 7 or 8 data bits, hardware and software flow control (RTS/CTS, XON/XOFF) | — |
| Internal Flash | 512 bytes (for VID/PID and descriptors) | — |
| Internal Regulator | Integrated 3.3V LDO | — |
| Internal Oscillator | Yes (no external crystal required) | 12 MHz (with optional external clock) |
| GPIO Pins | Available (multi-function) | — |
| Boîtier | 28-pin SSOP | SSOP-28 (208 mil) |
| Operating Voltage | 5.0 V (VBUS-powered) | — |
| Plage de température de fonctionnement | -40C to +85C (industrial) | — |
| Suspend Current | [DATA_NEEDED: suspend current] | — |
| ESD Protection | [DATA_NEEDED: ESD rating (kV)] | — |
| Type de montage | Surface Mount | Surface Mount |
| Statut RoHS | Compliant | Compliant |
| MSL (Moisture Sensitivity Level) | [DATA_NEEDED: MSL level] | — |
| Manufacturer | Infineon Technologies (formerly Cypress Semiconductor) | — |
| Fonction | — | USB to UART serial bridge |
| USB Standard | — | USB 2.0 Full Speed (12 Mbps) |
| Data Rate (UART) | — | 300 baud to 3 Mbaud |
| Supply Voltage (VCC) | — | 3.3 V to 5.25 V |
| Logic I/O Voltage | — | 1.8 V to 5.25 V |
| Supply Current (typical) | — | 25 mA |
| Température de fonctionnement | — | -40 C to +85 C |
| Nombre de broches | — | 28 |
| On-chip EEPROM | — | 1 KB |
| Transmit Buffer | — | 16 bytes |
| Receive Buffer | — | 16 bytes |
| Modem Control Signals | — | RTS, CTS, DTR, DSR, DCD, RI |
| CBUS Pins | — | 6 configurable (TX/RX LED, Clock, GPIO, PWRON, SLEEP) |
| Internal LDO | — | 3.3 V for USB transceiver |
| Drivers | — | VCP, D2XX (multi-platform) |
| Niveau MSL | — | 1 |