DG442DY+ vs DG442DK Vergleich
Detaillierter Direktvergleich von DG442DY+ von Maxim Integrated und DG442DK von Maxim Integrated. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Maxim Integrated
DG442DK - 85 Ohm Quad SPST Analog Switch | Maxim Integrated | 16-CDIP
DG442DK ✓ AktivSpezifikationsvergleich
| Parameter | DG442DY+ | DG442DK |
|---|---|---|
| Marke | Maxim Integrated | Maxim Integrated |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Quad SPST CMOS analog switch | — |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | Single-Pole Single-Throw (SPST), Normally Open |
| Typical On-Resistance | 85 ohm | — |
| On-Resistance Matching Between Switches | 4 ohm maximum | 4 ohm max |
| On-Resistance Flatness Over Signal Range | 9 ohm maximum | 9 ohm max |
| Low-Leakage Specification | 80 pA | — |
| Power Consumption | 0.2 mW | — |
| Dual Supply Voltage Range | [DATA_NEEDED: dual supply voltage range] | — |
| Single Supply Voltage Range | [DATA_NEEDED: single supply voltage range] | — |
| Signal Voltage Range | [DATA_NEEDED: allowable signal voltage range] | — |
| Switch-On Time | [DATA_NEEDED: switch-on time] | — |
| Switch-Off Time | [DATA_NEEDED: switch-off time] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Channel-to-Channel Crosstalk | [DATA_NEEDED: channel-to-channel crosstalk] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm | 16-CDIP ceramic, 0.300 in (7.62 mm) lead pitch |
| Montageart | Surface mount | Through-hole |
| RoHS-Status | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Switches | — | 4 |
| Multiplexer Configuration | — | 1:1 |
| On-Resistance (RON) | — | 85 ohm max |
| Off-Leakage Current | — | 500 pA |
| Versorgungsspannung | — | 15 V |
| Turn-On Time | — | 250 ns |
| Turn-Off Time | — | 170 ns |
| Pin-Anzahl | — | 16 |
| Signal Direction | — | Bidirectional (conducts equally in either direction) |
| Logic Input Levels | — | [DATA_NEEDED: logic input logic levels] |
| Versorgungsstrom | — | [DATA_NEEDED: supply current] |
| Signal Bandwidth | — | [DATA_NEEDED: signal bandwidth] |