DG442DY+ vs DG442DK Comparaison
Comparaison détaillée côte à côte de DG442DY+ par Maxim Integrated et DG442DK par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Maxim Integrated
DG442DK - 85 Ohm Quad SPST Analog Switch | Maxim Integrated | 16-CDIP
DG442DK ✓ ActifComparaison des spécifications
| Paramètre | DG442DY+ | DG442DK |
|---|---|---|
| Marque | Maxim Integrated | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Quad SPST CMOS analog switch | — |
| Number of Circuits | 4 circuits | — |
| Switch Configuration | 1:1 SPST | Single-Pole Single-Throw (SPST), Normally Open |
| Typical On-Resistance | 85 ohm | — |
| On-Resistance Matching Between Switches | 4 ohm maximum | 4 ohm max |
| On-Resistance Flatness Over Signal Range | 9 ohm maximum | 9 ohm max |
| Low-Leakage Specification | 80 pA | — |
| Power Consumption | 0.2 mW | — |
| Dual Supply Voltage Range | [DATA_NEEDED: dual supply voltage range] | — |
| Single Supply Voltage Range | [DATA_NEEDED: single supply voltage range] | — |
| Signal Voltage Range | [DATA_NEEDED: allowable signal voltage range] | — |
| Switch-On Time | [DATA_NEEDED: switch-on time] | — |
| Switch-Off Time | [DATA_NEEDED: switch-off time] | — |
| Charge Injection | [DATA_NEEDED: charge injection] | [DATA_NEEDED: charge injection] |
| Channel-to-Channel Crosstalk | [DATA_NEEDED: channel-to-channel crosstalk] | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Boîtier | 16-lead SOIC, 3.9 mm x 9.9 mm x 1.55 mm | 16-CDIP ceramic, 0.300 in (7.62 mm) lead pitch |
| Type de montage | Surface mount | Through-hole |
| Statut RoHS | [DATA_NEEDED: RoHS status] | unknown |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| Number of Switches | — | 4 |
| Multiplexer Configuration | — | 1:1 |
| On-Resistance (RON) | — | 85 ohm max |
| Off-Leakage Current | — | 500 pA |
| Tension d'alimentation | — | 15 V |
| Turn-On Time | — | 250 ns |
| Turn-Off Time | — | 170 ns |
| Nombre de broches | — | 16 |
| Signal Direction | — | Bidirectional (conducts equally in either direction) |
| Logic Input Levels | — | [DATA_NEEDED: logic input logic levels] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Signal Bandwidth | — | [DATA_NEEDED: signal bandwidth] |