DRV8434ARGER vs DRV8434ERGER Vergleich
Detaillierter Direktvergleich von DRV8434ARGER von Texas Instruments und DRV8434ERGER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8434ERGER - 48V 2.5A Dual H-Bridge Motor Driver | Texas Instruments
DRV8434ERGER ✓ AktivSpezifikationsvergleich
| Parameter | DRV8434ARGER | DRV8434ERGER |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,65 | $1,59 |
| Motor Type | Bipolar stepper | Bipolar stepper or dual brushed DC |
| Number of H-Bridges | 2 | 2 |
| Ausgangskonfiguration | NMOS H-bridge | — |
| Supply Voltage (VM) | 4.5 V to 48 V | — |
| Full-Scale Output Current | 2.5 A per phase (peak) | — |
| RMS Output Current | 1.5 A per phase (typical) | — |
| Microstepping Resolution | Full-step to 1/256 step | — |
| Current Sensing | Integrated (no external sense resistor) | — |
| Stall Detection | Yes (GPIO output) | — |
| Decay Mode | Smart Tune (mixed decay) | — |
| Control Interface | Step/Direction + SPI | STEP/DIR + M0/M1 |
| Sleep Pin | Yes (nSLEEP, active low) | — |
| Fault Pin | Yes (nFAULT, active low, open-drain) | — |
| Protection Features | UVLO, OCP, OVP, OTP, open load, stall | UVLO, OCP, short-circuit, open load, thermal shutdown, charge pump fault |
| Betriebstemperatur | -40 C to +125 C | -40 C to +125 C |
| Gehäuse | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with exposed thermal pad |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 (1 year floor life) | [DATA_NEEDED: MSL rating] |
| RoHS-Status | Compliant | Compliant |
| Betriebsversorgungsspannung | — | 4.5 V to 48 V |
| Continuous Output Current (per H-bridge) | — | 2.5 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) (HS + LS per bridge) | — | [DATA_NEEDED: RDS(on) value] |
| Integrated Current Sense | — | Yes (internal sense-FET, no external shunt) |
| Microstepping Indexer | — | Full-step to 1/256 native |
| Decay Modes | — | Smart Tune, Slow, Mixed, Fast (selectable) |
| Sleep Mode Pin | — | Yes (nSLEEP) |
| Fault Output | — | Yes (nFAULT, open-drain) |