DRV8434ARGER vs DRV8434ERGER Comparaison
Comparaison détaillée côte à côte de DRV8434ARGER par Texas Instruments et DRV8434ERGER par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8434ERGER - 48V 2.5A Dual H-Bridge Motor Driver | Texas Instruments
DRV8434ERGER ✓ ActifComparaison des spécifications
| Paramètre | DRV8434ARGER | DRV8434ERGER |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,65 | $1,59 |
| Motor Type | Bipolar stepper | Bipolar stepper or dual brushed DC |
| Number of H-Bridges | 2 | 2 |
| Configuration de sortie | NMOS H-bridge | — |
| Supply Voltage (VM) | 4.5 V to 48 V | — |
| Full-Scale Output Current | 2.5 A per phase (peak) | — |
| RMS Output Current | 1.5 A per phase (typical) | — |
| Microstepping Resolution | Full-step to 1/256 step | — |
| Current Sensing | Integrated (no external sense resistor) | — |
| Stall Detection | Yes (GPIO output) | — |
| Decay Mode | Smart Tune (mixed decay) | — |
| Control Interface | Step/Direction + SPI | STEP/DIR + M0/M1 |
| Sleep Pin | Yes (nSLEEP, active low) | — |
| Fault Pin | Yes (nFAULT, active low, open-drain) | — |
| Protection Features | UVLO, OCP, OVP, OTP, open load, stall | UVLO, OCP, short-circuit, open load, thermal shutdown, charge pump fault |
| Température de fonctionnement | -40 C to +125 C | -40 C to +125 C |
| Boîtier | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with exposed thermal pad |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 (1 year floor life) | [DATA_NEEDED: MSL rating] |
| Statut RoHS | Compliant | Compliant |
| Tension d'alimentation de fonctionnement | — | 4.5 V to 48 V |
| Continuous Output Current (per H-bridge) | — | 2.5 A |
| Peak Output Current | — | [DATA_NEEDED: peak current] |
| RDS(on) (HS + LS per bridge) | — | [DATA_NEEDED: RDS(on) value] |
| Integrated Current Sense | — | Yes (internal sense-FET, no external shunt) |
| Microstepping Indexer | — | Full-step to 1/256 native |
| Decay Modes | — | Smart Tune, Slow, Mixed, Fast (selectable) |
| Sleep Mode Pin | — | Yes (nSLEEP) |
| Fault Output | — | Yes (nFAULT, open-drain) |