DRV8434RGER vs DRV8434ARGER Vergleich
Detaillierter Direktvergleich von DRV8434RGER von Texas Instruments und DRV8434ARGER von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8434RGER - 48V 2.5A Stepper Driver VQFN-24 | Texas Instruments
DRV8434RGER ✓ AktivSpezifikationsvergleich
| Parameter | DRV8434RGER | DRV8434ARGER |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $2,79 | $2,65 |
| Motor Type | Bipolar stepper (two-phase) | Bipolar stepper |
| Supply Voltage (VM) | 4.5 V to 48 V | 4.5 V to 48 V |
| Continuous Output Current (per H-bridge) | 2.5 A | — |
| Peak Output Current | [DATA_NEEDED: peak current] | — |
| Microstepping Resolution | Up to 1/256 | Full-step to 1/256 step |
| Control Interface | STEP/DIRECTION (PWM optional) | Step/Direction + SPI |
| Current Sensing | Integrated (no external shunt) | Integrated (no external sense resistor) |
| Decay Mode | SmartTune (automatic), configurable | Smart Tune (mixed decay) |
| On-Resistance HS+LS (typ.) | [DATA_NEEDED: Rdson per bridge] | — |
| Sleep Current | 2 uA typical | — |
| Internal Reference Voltage | 3.3 V | — |
| Logic Input Voltage | 1.8 V, 3.3 V, 5.0 V compatible | — |
| PWM Off-Time Options | 7, 16, 24, 32 microseconds | — |
| Betriebstemperaturbereich | -40 C to +125 C | — |
| Gehäuse | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 (per JEDEC J-STD-020) | 2 (1 year floor life) |
| RoHS-Status | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Spread Spectrum Clocking | Yes | — |
| Number of H-Bridges | — | 2 |
| Ausgangskonfiguration | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Stall Detection | — | Yes (GPIO output) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |
| Betriebstemperatur | — | -40 C to +125 C |