DRV8434RGER vs DRV8434ARGER Comparaison
Comparaison détaillée côte à côte de DRV8434RGER par Texas Instruments et DRV8434ARGER par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8434RGER - 48V 2.5A Stepper Driver VQFN-24 | Texas Instruments
DRV8434RGER ✓ ActifComparaison des spécifications
| Paramètre | DRV8434RGER | DRV8434ARGER |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $2,79 | $2,65 |
| Motor Type | Bipolar stepper (two-phase) | Bipolar stepper |
| Supply Voltage (VM) | 4.5 V to 48 V | 4.5 V to 48 V |
| Continuous Output Current (per H-bridge) | 2.5 A | — |
| Peak Output Current | [DATA_NEEDED: peak current] | — |
| Microstepping Resolution | Up to 1/256 | Full-step to 1/256 step |
| Control Interface | STEP/DIRECTION (PWM optional) | Step/Direction + SPI |
| Current Sensing | Integrated (no external shunt) | Integrated (no external sense resistor) |
| Decay Mode | SmartTune (automatic), configurable | Smart Tune (mixed decay) |
| On-Resistance HS+LS (typ.) | [DATA_NEEDED: Rdson per bridge] | — |
| Sleep Current | 2 uA typical | — |
| Internal Reference Voltage | 3.3 V | — |
| Logic Input Voltage | 1.8 V, 3.3 V, 5.0 V compatible | — |
| PWM Off-Time Options | 7, 16, 24, 32 microseconds | — |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Boîtier | VQFN-24 (RGE) 4x4 mm with thermal pad | VQFN-24 (RGE) 4x4 mm with thermal pad |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 (per JEDEC J-STD-020) | 2 (1 year floor life) |
| Statut RoHS | Compliant | Compliant |
| Lead-Free / Halogen-Free | Yes / Yes | — |
| Spread Spectrum Clocking | Yes | — |
| Number of H-Bridges | — | 2 |
| Configuration de sortie | — | NMOS H-bridge |
| Full-Scale Output Current | — | 2.5 A per phase (peak) |
| RMS Output Current | — | 1.5 A per phase (typical) |
| Stall Detection | — | Yes (GPIO output) |
| Sleep Pin | — | Yes (nSLEEP, active low) |
| Fault Pin | — | Yes (nFAULT, active low, open-drain) |
| Protection Features | — | UVLO, OCP, OVP, OTP, open load, stall |
| Température de fonctionnement | — | -40 C to +125 C |