DRV8806PWPR vs DRV8873HPWPR Vergleich
Detaillierter Direktvergleich von DRV8806PWPR von Texas Instruments und DRV8873HPWPR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ AktivSpezifikationsvergleich
| Parameter | DRV8806PWPR | DRV8873HPWPR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $3,20 | $1,86 |
| Number of Channels | 4 (quad low-side) | — |
| Ausgangskonfiguration | Low-side DMOS, open drain | — |
| Supply Voltage (VM) | 8.2 V to 38 V | 4.5 V to 38 V |
| Continuous Output Current per Channel | 2 A | — |
| Peak Output Current per Channel | 3 A | — |
| RDS(on) per Channel | 200 mOhm (typical) | — |
| Schnittstelle | SPI (serial, 3.3 V logic) | — |
| Open-Load Detection | Yes, via SPI | — |
| Überstromschutz | Yes, per channel | — |
| Thermisches Abschalten | Yes | — |
| Undervoltage Lockout | Yes | — |
| Built-in Clamp Diodes | Yes (freewheeling) | — |
| Betriebstemperatur | -40C to +85C | -40 C to +125 C |
| Gehäuse | HTSSOP-16 (PWP) with PowerPAD | 24-pin HTSSOP (PWP) with PowerPAD |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 2 | 3 (168 hr / 260 C) |
| RoHS-Status | Compliant | Compliant |
| Motor Type | — | Brushed DC |
| Topologie | — | H-Bridge (4 N-channel MOSFETs) |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Control Interface | — | PH/EN (hardware) or PWM, selectable via MODE |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |