DRV8806PWPR vs DRV8873HPWPR Comparaison
Comparaison détaillée côte à côte de DRV8806PWPR par Texas Instruments et DRV8873HPWPR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ ActifComparaison des spécifications
| Paramètre | DRV8806PWPR | DRV8873HPWPR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Motor Drivers | Motor Drivers |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $3,20 | $1,86 |
| Number of Channels | 4 (quad low-side) | — |
| Configuration de sortie | Low-side DMOS, open drain | — |
| Supply Voltage (VM) | 8.2 V to 38 V | 4.5 V to 38 V |
| Continuous Output Current per Channel | 2 A | — |
| Peak Output Current per Channel | 3 A | — |
| RDS(on) per Channel | 200 mOhm (typical) | — |
| Interface | SPI (serial, 3.3 V logic) | — |
| Open-Load Detection | Yes, via SPI | — |
| Protection contre les surintensités | Yes, per channel | — |
| Arrêt thermique | Yes | — |
| Undervoltage Lockout | Yes | — |
| Built-in Clamp Diodes | Yes (freewheeling) | — |
| Température de fonctionnement | -40C to +85C | -40 C to +125 C |
| Boîtier | HTSSOP-16 (PWP) with PowerPAD | 24-pin HTSSOP (PWP) with PowerPAD |
| Type de montage | Surface Mount | Surface Mount |
| Niveau MSL | 2 | 3 (168 hr / 260 C) |
| Statut RoHS | Compliant | Compliant |
| Motor Type | — | Brushed DC |
| Topologie | — | H-Bridge (4 N-channel MOSFETs) |
| Absolute Maximum VM | — | 40 V |
| Peak Output Current | — | 10 A |
| Continuous Output Current | — | 3.5 A (with proper PCB thermal design) |
| RDS(on) per HS+LS FET | — | [DATA_NEEDED: typical mOhm at 25 C] |
| Integrated Current Sensing | — | Yes (IPROPI analog output) |
| Control Interface | — | PH/EN (hardware) or PWM, selectable via MODE |
| Current Regulation | — | Yes (Smart-tune or fixed off-time) |
| AEC-Q100 | — | Not qualified (use DRV8873-Q1 for automotive) |