DRV8873HPWPR vs TMP816PWR Vergleich
Detaillierter Direktvergleich von DRV8873HPWPR von Texas Instruments und TMP816PWR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Aktiv
Spezifikationsvergleich
| Parameter | DRV8873HPWPR | TMP816PWR |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Motor Drivers | Motor Drivers |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,86 | $0,39 |
| Motor Type | Brushed DC | — |
| Topologie | H-Bridge (4 N-channel MOSFETs) | Single-phase full-wave BLDC fan predriver |
| Supply Voltage (VM) | 4.5 V to 38 V | — |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | — |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Betriebstemperatur | -40 C to +125 C | — |
| Gehäuse | 24-pin HTSSOP (PWP) with PowerPAD | 20-pin TSSOP (PW), 4.40 mm width |
| Montageart | Surface Mount | Surface Mount |
| MSL-Level | 3 (168 hr / 260 C) | 1 (unlimited floor life at <30 °C / 85 % RH) |
| RoHS-Status | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Supply Voltage (VCC) | — | 6 V to 16 V |
| Maximum Supply Voltage | — | 18 V |
| Load Voltage | — | 10 V |
| Output Current | — | 20 mA (gate drive to external PNP+NMOS) |
| Anzahl der Ausgänge | — | 1 (pre-driver output pair) |
| Current Limit Threshold | — | Adjustable (external resistor) |
| Betriebstemperaturbereich | — | -30 °C to +95 °C |
| Control Input | — | PWM speed command |
| Tachometer Output | — | FG (frequency-generator) signal |
| External Power Stage | — | PNP + N-channel MOSFET pair |
| Protection Features | — | Thermal shutdown, adjustable current limit, lock-rotor protection |
| Lead-Free | — | Yes |
| Drive Method | — | Full-wave, sensored (Hall-element input) |