DRV8873HPWPR vs TMP816PWR Comparación
Comparación detallada lado a lado de DRV8873HPWPR por Texas Instruments y TMP816PWR por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
DRV8873HPWPR - 40V 10A H-Bridge Motor Driver | Texas Instruments
DRV8873HPWPR ✓ Activo
Comparación de especificaciones
| Parámetro | DRV8873HPWPR | TMP816PWR |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Motor Drivers | Motor Drivers |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $1,86 | $0,39 |
| Motor Type | Brushed DC | — |
| Topología | H-Bridge (4 N-channel MOSFETs) | Single-phase full-wave BLDC fan predriver |
| Supply Voltage (VM) | 4.5 V to 38 V | — |
| Absolute Maximum VM | 40 V | — |
| Peak Output Current | 10 A | — |
| Continuous Output Current | 3.5 A (with proper PCB thermal design) | — |
| RDS(on) per HS+LS FET | [DATA_NEEDED: typical mOhm at 25 C] | — |
| Integrated Current Sensing | Yes (IPROPI analog output) | — |
| Control Interface | PH/EN (hardware) or PWM, selectable via MODE | — |
| Current Regulation | Yes (Smart-tune or fixed off-time) | — |
| Temperatura de funcionamiento | -40 C to +125 C | — |
| Encapsulado | 24-pin HTSSOP (PWP) with PowerPAD | 20-pin TSSOP (PW), 4.40 mm width |
| Tipo de montaje | Surface Mount | Surface Mount |
| Nivel MSL | 3 (168 hr / 260 C) | 1 (unlimited floor life at <30 °C / 85 % RH) |
| Estado RoHS | Compliant | Compliant |
| AEC-Q100 | Not qualified (use DRV8873-Q1 for automotive) | — |
| Supply Voltage (VCC) | — | 6 V to 16 V |
| Maximum Supply Voltage | — | 18 V |
| Load Voltage | — | 10 V |
| Output Current | — | 20 mA (gate drive to external PNP+NMOS) |
| Número de salidas | — | 1 (pre-driver output pair) |
| Current Limit Threshold | — | Adjustable (external resistor) |
| Rango de temperatura de funcionamiento | — | -30 °C to +95 °C |
| Control Input | — | PWM speed command |
| Tachometer Output | — | FG (frequency-generator) signal |
| External Power Stage | — | PNP + N-channel MOSFET pair |
| Protection Features | — | Thermal shutdown, adjustable current limit, lock-rotor protection |
| Lead-Free | — | Yes |
| Drive Method | — | Full-wave, sensored (Hall-element input) |