DS90C402M vs ADM485ARZ Vergleich
Detaillierter Direktvergleich von DS90C402M von Texas Instruments und ADM485ARZ von Analog Devices. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ AktivSpezifikationsvergleich
| Parameter | DS90C402M | ADM485ARZ |
|---|---|---|
| Marke | Texas Instruments | Analog Devices |
| Kategorie | Interface ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $1,10 | $1,62 |
| Device Type | Dual LVDS receiver | — |
| Receiver Configuration | 2 receivers | — |
| Input Threshold Sensitivity | ±100 mV | — |
| Common-Mode Noise Protection | Supported | — |
| Data-Rate Optimization | High data rate | — |
| Power Optimization | Low power | — |
| Interface Pairing | DS90C401 companion device | — |
| Topologie | Dual high-speed point-to-point interface | — |
| Gehäuse | 8-lead SOIC | SOIC-8 (SO-8) / SO-8 |
| Package Family | SOIC surface-mount package family | — |
| Anzahl der Pins | 8 | — |
| Betriebsversorgungsspannung | [DATA_NEEDED: operating supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Versorgungsstrom | [DATA_NEEDED: supply current] | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Differential Input Termination | [DATA_NEEDED: input termination requirement] | — |
| RoHS-Status | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Montageart | Surface mount | Surface Mount |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Versorgungsspannung | — | 5 V (single supply) |
| Datenrate | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| MSL-Level | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |