DS90C402M vs ADM485ARZ Сравнение
Подробное сравнение бок о бок DS90C402M от Texas Instruments и ADM485ARZ от Analog Devices. Сравните ключевые характеристики, электрические параметры, упаковку, статус жизненного цикла, цены и наличие, чтобы выбрать лучший компонент для ваших требований.
Analog Devices
ADM485ARZ - 5V 5Mbps Half-Duplex RS-485/RS-422 Transceiver | Analog Devices (Tape & Reel)
ADM485ARZ ✓ АктивенСравнение характеристик
| Параметр | DS90C402M | ADM485ARZ |
|---|---|---|
| Бренд | Texas Instruments | Analog Devices |
| Категория | Interface ICs | Interface ICs |
| Статус жизненного цикла | Активен | Активен |
| Наличие | In Stock | In Stock |
| Цена за единицу (USD) | $1,10 | $1,62 |
| Device Type | Dual LVDS receiver | — |
| Receiver Configuration | 2 receivers | — |
| Input Threshold Sensitivity | ±100 mV | — |
| Common-Mode Noise Protection | Supported | — |
| Data-Rate Optimization | High data rate | — |
| Power Optimization | Low power | — |
| Interface Pairing | DS90C401 companion device | — |
| Топология | Dual high-speed point-to-point interface | — |
| Корпус | 8-lead SOIC | SOIC-8 (SO-8) / SO-8 |
| Package Family | SOIC surface-mount package family | — |
| Количество выводов | 8 | — |
| Рабочее напряжение питания | [DATA_NEEDED: operating supply voltage] | — |
| Propagation Delay | [DATA_NEEDED: propagation delay] | — |
| Input Common-Mode Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Maximum Data Rate | [DATA_NEEDED: maximum data rate] | — |
| Ток потребления | [DATA_NEEDED: supply current] | — |
| Диапазон рабочих температур | [DATA_NEEDED: operating temperature range] | -40 C to +85 C |
| Differential Input Termination | [DATA_NEEDED: input termination requirement] | — |
| Статус RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | Unaffected |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification] | — |
| MSL | [DATA_NEEDED: moisture sensitivity level] | — |
| Тип монтажа | Surface mount | Surface Mount |
| Type | — | Transceiver |
| Protocol | — | RS-422, RS-485 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half |
| Напряжение питания | — | 5 V (single supply) |
| Скорость передачи данных | — | 5 Mbps (max) |
| Receiver Hysteresis | — | [DATA_NEEDED: receiver hysteresis] |
| Common-Mode Range | — | -7 V to +12 V |
| Driver Differential Output | — | [DATA_NEEDED: VOD min/max] |
| ESD Protection | — | [DATA_NEEDED: ESD HBM rating] |
| Уровень MSL | — | 1 (Unlimited) |
| Compliance | — | ROHS3 Compliant |
| Enable Pins | — | Yes (DE driver enable, RE receiver enable, active-low/GPIO logic) |