EPC18QI100 vs EPC16QI100TBAC Vergleich
Detaillierter Direktvergleich von EPC18QI100 von Altera und EPC16QI100TBAC von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Altera
EPC16QI100TBAC - Altera Enhanced Configuration PROM 16Mb | FPGA
EPC16QI100TBAC ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | EPC18QI100 | EPC16QI100TBAC |
|---|---|---|
| Marke | Altera | Altera |
| Kategorie | Memory ICs | Memory ICs |
| Lebenszyklusstatus | Obsolete | Letzte Kaufgelegenheit |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,40 | $15,95 |
| Manufacturer | Altera (now Intel Programmable Solutions Group) | — |
| Device Type | FPGA Configuration PROM (nonvolatile) | — |
| Memory Density | 18 Mbit (18,874,368 bits) | 16 Mbit (2 Mbyte) |
| Configuration Interface | Altera serial (DATA, DCLK, nCONFIG, nSTATUS, CONF_DONE) | — |
| Core Supply Voltage (VCCINT) | 3.3 V | — |
| I/O Supply Voltage (VCCIO) | 3.3 V or 5 V tolerant | — |
| Programming Interface | JTAG (IEEE 1149.1) in-system programmable | JTAG / 4-wire passive serial |
| Cascading Support | Yes (via nCASC pin, multi-device chains supported) | — |
| Gehäuse | 100-pin PQFP (Plastic Quad Flat Pack) | 100-pin PQFP (20 x 14 mm) |
| Package Dimensions | 14 mm x 20 mm x 1.4 mm (body) / 3.4 mm (overall incl. leads) | — |
| Betriebstemperaturbereich | -40 C to +85 C (industrial) | — |
| Montageart | Surface Mount | Surface Mount (PQFP) |
| MSL-Level | [DATA_NEEDED: MSL level] | 3 (168 hours) |
| Lead Finish | Matte tin (lead-free, per Altera Pb-free roadmap) | — |
| RoHS-Status | Compliant (Pb-free part marking) | — |
| Configuration Time | [DATA_NEEDED: configuration time at typical DCLK] | — |
| End-of-Life Status | Obsolete; replaced by Altera/Intel EPCQ family | — |
| Speichertyp | — | Flash (Enhanced Configuration Device) |
| Versorgungsspannung | — | 3.3 V |
| Configuration Modes | — | Passive Parallel Synchronous (PPS), Passive Parallel Asynchronous (PPA), Passive Serial (PS) |
| Maximum Configuration Clock | — | 40 MHz |
| Number of Configuration Pages | — | Up to 8 (selectable via PGM[2..0]) |
| In-System Programmable | — | Yes (via JTAG / IEEE 1149.1) |
| JTAG Support | — | Yes (IEEE 1149.1 boundary-scan and programming) |
| Supported FPGA Families | — | Altera Stratix, Cyclone, Arria series |
| Data Compression | — | Supported (15-30% density gain depending on target FPGA) |
| Betriebstemperatur | — | -40C to +85C (industrial) |
| Lead-Free / RoHS | — | Lead-free (per JEDEC J-STD-020); RoHS compliance: [DATA_NEEDED] |
| Dynamic Reconfiguration | — | Yes (page mode via PGM[2..0] pins) |
| Configuration Controller | — | Integrated |