EPC21LC20 vs EPC2CC20N Vergleich
Detaillierter Direktvergleich von EPC21LC20 von Intel und EPC2CC20N von Altera. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC21LC20 | EPC2CC20N |
|---|---|---|
| Marke | Intel | Altera |
| Kategorie | Memory ICs | FPGA & CPLD |
| Lebenszyklusstatus | Aktiv | NRND |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,40 | $10,85 |
| Speichertyp | Serial Configuration PROM (Flash-based, in-system programmable) | — |
| Density | 2 Mb (2,097,152 bits) | [DATA_NEEDED: bitstream density in bits] |
| Configuration Mode Supported | Serial (PS) for Altera SRAM-based LUT FPGAs | — |
| Maximum DCLK Frequency | 10 MHz | — |
| Access Time | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] | — |
| Programming Interface | IEEE 1149.1 (JTAG) | JTAG (IEEE 1149.1) via ByteBlasterMV / USB-Blaster |
| Program/Erase Endurance | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] | — |
| Operating Voltage (VCC) | 3.0 V to 3.6 V (3.3 V typical) | — |
| Standby Current | [DATA_NEEDED: ICCSB value] | — |
| Active Read Current | [DATA_NEEDED: ICC active current] | — |
| Operating Temperature (commercial) | 0 °C to +70 °C (LC suffix) | — |
| Operating Temperature (industrial) | [DATA_NEEDED: -40 to +85 °C for LI variant] | — |
| Gehäuse / Bauform | 20-pin PLCC (J-lead, JEDEC MS-018) | — |
| Montageart | Surface Mount (PLCC socket or solder) | Surface Mount (PLCC-20 socket compatible) |
| MSL-Level | [DATA_NEEDED: confirm moisture sensitivity level] | [DATA_NEEDED: MSL rating] |
| RoHS-Status | [DATA_NEEDED: confirm from Altera product page] | [DATA_NEEDED: RoHS compliance status] |
| Lead-Free (Pb-free) | [DATA_NEEDED: confirm] | — |
| Compatible FPGA Families | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) | — |
| JTAG Boundary-Scan Compliant | Yes (IEEE Std 1149.1) | — |
| Data Width | 1 bit (serial DATA output) | — |
| Funktion | — | Configuration device for SRAM-based LUT FPGAs |
| Gehäuse | — | PLCC-20 |
| Configuration Interface | — | 16-bit parallel (FPP) / Passive Serial (PS) |
| Supply Voltage (VCC) | — | 3.3 V |
| In-System Programmable | — | Yes |
| Error Detection | — | 16-bit CRC on configuration frames |
| Configuration Modes Supported | — | FPP and PS (depends on host FPGA) |
| Cascadable | — | Yes (multiple EPC2 devices for larger bitstreams) |
| Open-Drain Status Pin | — | Yes (CONF_DONE / nSTATUS compatible) |
| Betriebstemperatur | — | [DATA_NEEDED: industrial/commercial temp range] |