EPC22LC20 vs EPC21LC20 Vergleich
Detaillierter Direktvergleich von EPC22LC20 von Intel und EPC21LC20 von Intel. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | EPC22LC20 | EPC21LC20 |
|---|---|---|
| Marke | Intel | Intel |
| Kategorie | FPGA & CPLD | Memory ICs |
| Lebenszyklusstatus | Obsolete | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $4,10 | $10,40 |
| Funktion | In-System Programmable Configuration PROM for SRAM-based FPGAs | — |
| Speichergröße | 1.6 Mbit | — |
| Programmable Type | In System Programmable (IEEE 1532 / Jam STAPL) | — |
| Supply Voltage - Low Range | 3.0 V to 3.6 V | — |
| Supply Voltage - High Range | 4.75 V to 5.25 V | — |
| Supported FPGA Families | ACEX 1K, APEX II, APEX 20K, FLEX 10K | — |
| Configuration Interface | Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) | — |
| Programming Interface | JTAG (IEEE 1149.1 / IEEE 1532) | IEEE 1149.1 (JTAG) |
| Gehäuse / Bauform | 20-LCC (J-Lead, 9 x 9 mm) | 20-pin PLCC (J-lead, JEDEC MS-018) |
| Montageart | Surface Mount (PLCC socket compatible) | Surface Mount (PLCC socket or solder) |
| Packaging | Tube | — |
| Betriebstemperatur | 0 C to +70 C (commercial) | — |
| Minimum DC Input Voltage | -0.3 V | — |
| Input Overshoot Tolerance | 7.0 V for <100 mA, <20 ns no-load | — |
| Input Undershoot Tolerance | -2.0 V for <100 mA, <20 ns no-load | — |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free status not in verified data] | — |
| Speichertyp | — | Serial Configuration PROM (Flash-based, in-system programmable) |
| Density | — | 2 Mb (2,097,152 bits) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| MSL-Level | — | [DATA_NEEDED: confirm moisture sensitivity level] |
| RoHS-Status | — | [DATA_NEEDED: confirm from Altera product page] |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |