EPC22LC20 vs EPC21LC20 Comparação
Comparação detalhada lado a lado de EPC22LC20 por Intel e EPC21LC20 por Intel. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Comparação de especificações
| Parâmetro | EPC22LC20 | EPC21LC20 |
|---|---|---|
| Marca | Intel | Intel |
| Categoria | FPGA & CPLD | Memory ICs |
| Status do ciclo de vida | Obsolete | Ativo |
| Status do estoque | In Stock | In Stock |
| Preço unitário (USD) | $4,10 | $10,40 |
| Função | In-System Programmable Configuration PROM for SRAM-based FPGAs | — |
| Tamanho da memória | 1.6 Mbit | — |
| Programmable Type | In System Programmable (IEEE 1532 / Jam STAPL) | — |
| Supply Voltage - Low Range | 3.0 V to 3.6 V | — |
| Supply Voltage - High Range | 4.75 V to 5.25 V | — |
| Supported FPGA Families | ACEX 1K, APEX II, APEX 20K, FLEX 10K | — |
| Configuration Interface | Altera serial configuration (DCLK / DATA0 / nSTATUS / CONF_DONE) | — |
| Programming Interface | JTAG (IEEE 1149.1 / IEEE 1532) | IEEE 1149.1 (JTAG) |
| Encapsulamento / Caixa | 20-LCC (J-Lead, 9 x 9 mm) | 20-pin PLCC (J-lead, JEDEC MS-018) |
| Tipo de montagem | Surface Mount (PLCC socket compatible) | Surface Mount (PLCC socket or solder) |
| Packaging | Tube | — |
| Temperatura de operação | 0 C to +70 C (commercial) | — |
| Minimum DC Input Voltage | -0.3 V | — |
| Input Overshoot Tolerance | 7.0 V for <100 mA, <20 ns no-load | — |
| Input Undershoot Tolerance | -2.0 V for <100 mA, <20 ns no-load | — |
| Lead-Free / RoHS | [DATA_NEEDED: lead-free status not in verified data] | — |
| Tipo de memória | — | Serial Configuration PROM (Flash-based, in-system programmable) |
| Density | — | 2 Mb (2,097,152 bits) |
| Configuration Mode Supported | — | Serial (PS) for Altera SRAM-based LUT FPGAs |
| Maximum DCLK Frequency | — | 10 MHz |
| Access Time | — | approximately 35 ns [DATA_NEEDED: confirm exact datasheet figure] |
| Program/Erase Endurance | — | 100 cycles minimum [DATA_NEEDED: confirm from datasheet] |
| Operating Voltage (VCC) | — | 3.0 V to 3.6 V (3.3 V typical) |
| Standby Current | — | [DATA_NEEDED: ICCSB value] |
| Active Read Current | — | [DATA_NEEDED: ICC active current] |
| Operating Temperature (commercial) | — | 0 °C to +70 °C (LC suffix) |
| Operating Temperature (industrial) | — | [DATA_NEEDED: -40 to +85 °C for LI variant] |
| Nível MSL | — | [DATA_NEEDED: confirm moisture sensitivity level] |
| Status RoHS | — | [DATA_NEEDED: confirm from Altera product page] |
| Lead-Free (Pb-free) | — | [DATA_NEEDED: confirm] |
| Compatible FPGA Families | — | ACEX, APEX, Cyclone, FLEX, Mercury, Stratix (SRAM-based LUT) |
| JTAG Boundary-Scan Compliant | — | Yes (IEEE Std 1149.1) |
| Data Width | — | 1 bit (serial DATA output) |