FUSB340TMX vs HD3SS3212IRKSR Vergleich
Detaillierter Direktvergleich von FUSB340TMX von onsemi und HD3SS3212IRKSR von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | FUSB340TMX | HD3SS3212IRKSR |
|---|---|---|
| Marke | onsemi | Texas Instruments |
| Kategorie | Video ICs | Interface ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $0,86 | $0,55 |
| Funktion | USB 3.1 SuperSpeed 2:1 data switch | 2-channel differential 2:1/1:2 mux/demux |
| Switch Topology | 2:1 (high-speed differential) | — |
| Maximum Data Rate | 10 Gbps (USB 3.1 Gen2) | 10 Gbps per channel |
| Supported Protocols | USB 3.1 Gen1/Gen2, PCIe Gen3, SATA, DisplayPort 1.3, Fibre Channel | — |
| Number of Channels | 1 differential pair per direction (SuperSpeed TX/RX) | 2 differential |
| Betriebsversorgungsspannung | [DATA_NEEDED: typical VCC range] | — |
| Betriebstemperaturbereich | -40C to +85C | -40C to +85C |
| Gehäuse | 18-TMLP (2x2.8 mm) with exposed pad | 20-pin VQFN (2.5x4.5 mm, RKS) |
| Montageart | Surface Mount | Surface Mount |
| Insertion Loss at 5 GHz | [DATA_NEEDED: dB value from datasheet S-param plot] | — |
| Differential Skew | [DATA_NEEDED: ps, from datasheet AC electrical table] | — |
| Off Isolation | [DATA_NEEDED: dB at 2.5/5 GHz] | — |
| ESD Rating (HBM) | [DATA_NEEDED: kV per datasheet] | — |
| MSL-Level | 1 (Unlimited) | 2 (1 year floor life) |
| RoHS-Status | Compliant (ROHS3) | — |
| REACH Status | SVHC Unaffected | — |
| Lead-Free | Yes | — |
| Application Target | Mobile/Type-C reversible-cable accessory switch | — |
| Protocol | — | USB 3.1 Gen 1 / Gen 2, DisplayPort, PCIe |
| Versorgungsspannung | — | 3.0 V to 3.6 V |
| Quiescent Current (Iq) | — | 20 µA typical |
| On Resistance (Ron) | — | 5 ohm typical |
| Differential -3 dB Bandwidth | — | 7 GHz typical |
| Channel Capacitance | — | < 1.5 pF typical |
| ESD Protection (HBM) | — | 2 kV on high-speed pins |
| Control Input (SEL) | — | Active-high, internal pull-down, default Port B |
| Lead-Free / RoHS | — | Yes / Compliant |