FUSB340TMX vs HD3SS3212IRKSR Comparaison

Comparaison détaillée côte à côte de FUSB340TMX par onsemi et HD3SS3212IRKSR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
HD3SS3212IRKSR HD3SS3212IRKSR - 10Gbps USB 3.1 Type-C 2:1 Mux | TI

HD3SS3212IRKSR - 10Gbps USB 3.1 Type-C 2:1 Mux | TI

HD3SS3212IRKSR ✓ Actif

Comparaison des spécifications

Paramètre FUSB340TMX HD3SS3212IRKSR
Marque onsemi Texas Instruments
Catégorie Video ICs Interface ICs
Statut du cycle de vie Actif Actif
Statut du stock In Stock In Stock
Prix unitaire (USD) $0,86 $0,55
Fonction USB 3.1 SuperSpeed 2:1 data switch 2-channel differential 2:1/1:2 mux/demux
Switch Topology 2:1 (high-speed differential) —
Maximum Data Rate 10 Gbps (USB 3.1 Gen2) 10 Gbps per channel
Supported Protocols USB 3.1 Gen1/Gen2, PCIe Gen3, SATA, DisplayPort 1.3, Fibre Channel —
Number of Channels 1 differential pair per direction (SuperSpeed TX/RX) 2 differential
Tension d'alimentation de fonctionnement [DATA_NEEDED: typical VCC range] —
Plage de température de fonctionnement -40C to +85C -40C to +85C
Boîtier 18-TMLP (2x2.8 mm) with exposed pad 20-pin VQFN (2.5x4.5 mm, RKS)
Type de montage Surface Mount Surface Mount
Insertion Loss at 5 GHz [DATA_NEEDED: dB value from datasheet S-param plot] —
Differential Skew [DATA_NEEDED: ps, from datasheet AC electrical table] —
Off Isolation [DATA_NEEDED: dB at 2.5/5 GHz] —
ESD Rating (HBM) [DATA_NEEDED: kV per datasheet] —
Niveau MSL 1 (Unlimited) 2 (1 year floor life)
Statut RoHS Compliant (ROHS3) —
REACH Status SVHC Unaffected —
Lead-Free Yes —
Application Target Mobile/Type-C reversible-cable accessory switch —
Protocol — USB 3.1 Gen 1 / Gen 2, DisplayPort, PCIe
Tension d'alimentation — 3.0 V to 3.6 V
Quiescent Current (Iq) — 20 µA typical
On Resistance (Ron) — 5 ohm typical
Differential -3 dB Bandwidth — 7 GHz typical
Channel Capacitance — < 1.5 pF typical
ESD Protection (HBM) — 2 kV on high-speed pins
Control Input (SEL) — Active-high, internal pull-down, default Port B
Lead-Free / RoHS — Yes / Compliant

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis