INA121P vs INA128PA Vergleich
Detaillierter Direktvergleich von INA121P von Texas Instruments und INA128PA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ AktivSpezifikationsvergleich
| Parameter | INA121P | INA128PA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $5,65 | $0,00 |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | — |
| Input Offset Voltage | ±200 µV typical | — |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Ruhestrom | ±450 µA typical | 700 µA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | ±40 V |
| Betriebstemperaturbereich | -40 °C to +85 °C | — |
| Gehäuse | 8-Pin PDIP (P) | 8-pin PDIP |
| Montageart | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS-Status | Compliant | — |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Supply Range | — | Up to ±18 V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Betriebstemperatur | — | -40°C to +85°C |