INA121P vs INA128PA Comparación
Comparación detallada lado a lado de INA121P por Texas Instruments y INA128PA por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ ActivoComparación de especificaciones
| Parámetro | INA121P | INA128PA |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Estado del stock | In Stock | In Stock |
| Precio unitario (USD) | $5,65 | $0,00 |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | — |
| Input Offset Voltage | ±200 µV typical | — |
| Input Offset Drift | ±2 µV/°C typical | — |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Corriente en reposo | ±450 µA typical | 700 µA |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | — |
| Input Protection | ±40 V differential and common-mode | ±40 V |
| Rango de temperatura de funcionamiento | -40 °C to +85 °C | — |
| Encapsulado | 8-Pin PDIP (P) | 8-pin PDIP |
| Tipo de montaje | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| Estado RoHS | Compliant | — |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Number of Circuits | — | 1 circuit |
| Common-Mode Rejection Ratio | — | 130 dB |
| Minimum Common-Mode Rejection | — | 120 dB |
| Maximum Input Offset Voltage | — | 50 µV |
| Maximum Input Voltage Drift | — | 0.5 µV/°C |
| Maximum Input Bias Current | — | 5 nA |
| Supply Range | — | Up to ±18 V |
| Gain Setting | — | Single external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Green Product | — | Yes |
| Restricted Substances | — | No Sb/Br |
| Temperatura de funcionamiento | — | -40°C to +85°C |