INA121P vs INA2128P Vergleich
Detaillierter Direktvergleich von INA121P von Texas Instruments und INA2128P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ Aktiv
Spezifikationsvergleich
| Parameter | INA121P | INA2128P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 5 nA maximum |
| Input Offset Voltage | ±200 µV typical | 50 uV maximum |
| Input Offset Drift | ±2 µV/°C typical | 0.5 uV/degree C maximum |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Ruhestrom | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| Input Protection | ±40 V differential and common-mode | — |
| Betriebstemperaturbereich | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Gehäuse | 8-Pin PDIP (P) | 16-pin PDIP (SOL-16) |
| Montageart | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Setting | — | 1 external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |