INA121P vs INA2128P Pengandingan
Pengandingan Sisi Kiri Sisi Kanan Terperinci INA121P disebabkan oleh Texas Instruments dan INA2128P disebabkan oleh Texas Instruments. Bandingkan spesifikasi utama, parameter elektrik, pakej, status kehidupan, harga, dan keupayaan untuk menentukan komponen terbaik untuk keperluan disenjaya anda.
Texas Instruments
INA121P - FET-Input Low Power Instrumentation Amplifier DIP-8 | Texas Instruments
INA121P ✓ Aktif
Pengandingan Spesifikasi
| Parametr | INA121P | INA2128P |
|---|---|---|
| Merek | Texas Instruments | Texas Instruments |
| Kategori | Amplifier ICs | Amplifier ICs |
| Status Lingkungan Hidup | Aktif | Aktif |
| Amplifier Type | Instrumentation Amplifier (3-op-amp topology) | — |
| Number of Channels | 1 | — |
| Input Type | FET / CMOS | — |
| Input Bias Current | ±4 pA typical | 5 nA maximum |
| Input Offset Voltage | ±200 µV typical | 50 uV maximum |
| Input Offset Drift | ±2 µV/°C typical | 0.5 uV/degree C maximum |
| Input Voltage Noise Density | 20 nV/√Hz at 1 kHz | — |
| Arus Dalam Tentera | ±450 µA typical | — |
| Common-Mode Rejection Ratio (CMRR) | 106 dB minimum | — |
| Bandwidth (-3 dB) | 600 kHz at G = 100 | — |
| Nonlinearity Error | 0.001% (G = 10) | — |
| Gain Range | 1 V/V to 10,000 V/V (single external resistor) | 1 to 10,000 |
| Supply Voltage Range | ±2.25 V to ±18 V | plus or minus 18 V |
| Input Protection | ±40 V differential and common-mode | — |
| Gambaran Suhu Operasi | -40 °C to +85 °C | [DATA_NEEDED: operating temperature range] |
| Kemasan | 8-Pin PDIP (P) | 16-pin PDIP (SOL-16) |
| Jenis Pemasangan | Through-Hole | Through-hole |
| Slew Rate | [DATA_NEEDED: slew rate from datasheet] | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS status] |
| Lead-Free Finish | Yes (Matte Tin) | — |
| Amplifier Configuration | — | Dual instrumentation amplifier |
| Number of Amplifier Circuits | — | 2 circuits |
| Internal Architecture | — | 3-op-amp instrumentation amplifier |
| Gain Setting | — | 1 external resistor |
| Bandwidth at Gain 100 | — | 200 kHz |
| Common-Mode Rejection | — | 120 dB minimum |
| Input Protection Range | — | plus or minus 40 V |
| Input Circuitry | — | Current feedback |
| Power Class | — | Low power |
| Quiescent Current per Amplifier | — | [DATA_NEEDED: quiescent current per amplifier] |
| Maximum Supply Voltage | — | [DATA_NEEDED: maximum supply voltage] |
| Input Common-Mode Range | — | [DATA_NEEDED: input common-mode range] |
| Output Swing Range | — | [DATA_NEEDED: output swing range] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification status] |