INA128PA vs INA128P Vergleich
Detaillierter Direktvergleich von INA128PA von Texas Instruments und INA128P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA128PA | INA128P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Gehäuse | 8-pin PDIP | 8-pin plastic DIP (PDIP) |
| Common-Mode Rejection Ratio | 130 dB | 130 dB minimum |
| Minimum Common-Mode Rejection | 120 dB | — |
| Ruhestrom | 700 µA | 700 µA |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Betriebstemperatur | -40°C to +85°C | -40 °C to +85 °C |
| Montageart | Through-hole | — |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |