INA128PA vs INA128P Comparación
Comparación detallada lado a lado de INA128PA por Texas Instruments y INA128P por Texas Instruments. Compare las especificaciones clave, los parámetros eléctricos, el encapsulado, el estado del ciclo de vida, los precios y la disponibilidad para determinar el mejor componente para los requisitos de su diseño.
Comparación de especificaciones
| Parámetro | INA128PA | INA128P |
|---|---|---|
| Marca | Texas Instruments | Texas Instruments |
| Categoría | Amplifier ICs | Amplifier ICs |
| Estado del ciclo de vida | Activo | Activo |
| Product Type | Precision instrumentation amplifier | Precision instrumentation amplifier |
| Architecture | Three-op-amp instrumentation amplifier | Three-op-amp instrumentation amplifier |
| Number of Circuits | 1 circuit | — |
| Encapsulado | 8-pin PDIP | 8-pin plastic DIP (PDIP) |
| Common-Mode Rejection Ratio | 130 dB | 130 dB minimum |
| Minimum Common-Mode Rejection | 120 dB | — |
| Corriente en reposo | 700 µA | 700 µA |
| Maximum Input Offset Voltage | 50 µV | — |
| Maximum Input Voltage Drift | 0.5 µV/°C | — |
| Maximum Input Bias Current | 5 nA | — |
| Input Protection | ±40 V | ±40 V |
| Supply Range | Up to ±18 V | — |
| Gain Range | 1 to 10,000 | — |
| Gain Setting | Single external resistor | — |
| Bandwidth at Gain 100 | 200 kHz | 200 kHz |
| Green Product | Yes | — |
| Restricted Substances | No Sb/Br | — |
| Temperatura de funcionamiento | -40°C to +85°C | -40 °C to +85 °C |
| Tipo de montaje | Through-hole | — |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Bias Current | — | 5 nA maximum |
| Supply Voltage Range | — | ±2.25 V to ±18 V |
| Bandwidth | — | 1.3 MHz |
| Slew Rate | — | 4 V/µs |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |
| Estado RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |