INA131BP vs INA128P Vergleich
Detaillierter Direktvergleich von INA131BP von Texas Instruments und INA128P von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Spezifikationsvergleich
| Parameter | INA131BP | INA128P |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Amplifier Type | Precision instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Nominal Gain | 100 V/V | — |
| Gain Configuration | Fixed gain | — |
| Supply Voltage Range | 2.25 V to 18 V | ±2.25 V to ±18 V |
| Maximum Total Supply Voltage | 50 V | — |
| Signal Bandwidth | 70 kHz | — |
| Slew Rate | 0.7 V/µs | 4 V/µs |
| Adjustment Method | On-chip laser trimming | — |
| Number of Circuits | 1 circuit | — |
| Package Type | 8-pin PDIP | — |
| Anzahl der Pins | 8 pins | — |
| Montagestil | Through-hole | — |
| Temperature Grade | Industrial grade | — |
| Betriebstemperaturbereich | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 5 nA maximum |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 130 dB minimum |
| Power Supply Rejection Ratio | [DATA_NEEDED: power supply rejection ratio] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Protection | — | ±40 V |
| Ruhestrom | — | 700 µA |
| Bandwidth | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| Gehäuse | — | 8-pin plastic DIP (PDIP) |
| Betriebstemperatur | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |
| RoHS-Status | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |