INA131BP vs INA128P 비교
다음의 상세 나란히 비교: INA131BP 제조: Texas Instruments 및 INA128P 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
사양 비교
| 파라미터 | INA131BP | INA128P |
|---|---|---|
| 브랜드 | Texas Instruments | Texas Instruments |
| 카테고리 | Amplifier ICs | Amplifier ICs |
| 수명 주기 상태 | 활성 | 활성 |
| Amplifier Type | Precision instrumentation amplifier | — |
| Internal Amplifier Count | 3 amplifiers | — |
| Nominal Gain | 100 V/V | — |
| Gain Configuration | Fixed gain | — |
| Supply Voltage Range | 2.25 V to 18 V | ±2.25 V to ±18 V |
| Maximum Total Supply Voltage | 50 V | — |
| Signal Bandwidth | 70 kHz | — |
| Slew Rate | 0.7 V/µs | 4 V/µs |
| Adjustment Method | On-chip laser trimming | — |
| Number of Circuits | 1 circuit | — |
| Package Type | 8-pin PDIP | — |
| 핀 수 | 8 pins | — |
| 장착 스타일 | Through-hole | — |
| Temperature Grade | Industrial grade | — |
| 동작 온도 범위 | [DATA_NEEDED: operating temperature range] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | — |
| Input Bias Current | [DATA_NEEDED: input bias current] | 5 nA maximum |
| Common-Mode Rejection Ratio | [DATA_NEEDED: common-mode rejection ratio] | 130 dB minimum |
| Power Supply Rejection Ratio | [DATA_NEEDED: power supply rejection ratio] | — |
| Output Voltage Swing | [DATA_NEEDED: output voltage swing] | — |
| Quiescent Current per Channel | [DATA_NEEDED: quiescent current per channel] | — |
| Input Common-Mode Voltage Range | [DATA_NEEDED: input common-mode voltage range] | — |
| Product Type | — | Precision instrumentation amplifier |
| Architecture | — | Three-op-amp instrumentation amplifier |
| Offset Voltage | — | 50 µV maximum |
| Offset Voltage Drift | — | 0.5 µV/°C maximum |
| Input Protection | — | ±40 V |
| 대기 전류 | — | 700 µA |
| Bandwidth | — | 1.3 MHz |
| Bandwidth at Gain 100 | — | 200 kHz |
| 패키지 | — | 8-pin plastic DIP (PDIP) |
| 동작 온도 | — | -40 °C to +85 °C |
| Input Type | — | Differential input |
| Manufacturer | — | Texas Instruments |
| RoHS 상태 | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |