INA137UA vs INA166UA Vergleich
Detaillierter Direktvergleich von INA137UA von Texas Instruments und INA166UA von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA137UA - +/-6dB Audio Differential Line Receiver SOIC-8 | Texas Instruments
INA137UA ✓ AktivTexas Instruments
INA166UA - G=2000 Low-Noise Instrumentation Amplifier | TI
INA166UA ⚠ Letzte BestellmöglichkeitSpezifikationsvergleich
| Parameter | INA137UA | INA166UA |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Letzte Kaufgelegenheit |
| Device Type | Audio differential line receiver IC (single channel) | — |
| Gain | -6 dB (G = 1/2) or +6 dB (G = 2), selected by resistor configuration | — |
| Number of Channels | 1 | — |
| Versorgungsspannung | +/-18 V maximum (36 V total) | [DATA_NEEDED: supply-voltage range] |
| Ausgangstyp | Differential | Single-ended instrumentation-amplifier output |
| Gehäuse | 8-pin SOIC (DBV) | SOIC-14 (D) |
| Montageart | Surface mount | Surface mount |
| Manufacturer | Texas Instruments (Burr-Brown heritage) | — |
| Delivery Format | Tube (UA suffix) | — |
| Differential Input | Yes, balanced input pair (IN+ / IN-) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR minimum/typical at DC and at frequency] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage typical and maximum] | 50 µV |
| Versorgungsstrom | [DATA_NEEDED: quiescent supply current per amplifier] | [DATA_NEEDED: supply current] |
| Small-Signal Bandwidth | [DATA_NEEDED: bandwidth at G = 1/2 and G = 2] | — |
| Input Noise Density | [DATA_NEEDED: input voltage noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 15 V/µs |
| Betriebstemperaturbereich | [DATA_NEEDED: operating junction/ambient temperature range] | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance statement] | unknown |
| Lead-Free | [DATA_NEEDED: lead-free / halogen-free statement] | — |
| Product Type | — | 1 circuit instrumentation amplifier |
| Internal Gain | — | 2000 V/V |
| External Gain Resistor | — | Not required |
| -3 dB Bandwidth | — | 450 kHz |
| Input Bias Current | — | 2.5 µA |
| Architecture | — | Current-feedback |
| Number of Circuits | — | 1 circuit |
| Anzahl der Pins | — | 14 pins |
| Betriebstemperatur | — | -40 °C to +85 °C |
| Signal Type | — | Low-level differential input |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection ratio] |
| Rauschdichte | — | [DATA_NEEDED: input noise density] |
| REACH Status | — | unknown |