INA137UA vs INA166UA 比較
詳細並排比較 INA137UA 由 Texas Instruments 與 INA166UA 由 Texas Instruments. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。
Texas Instruments
INA137UA - +/-6dB Audio Differential Line Receiver SOIC-8 | Texas Instruments
INA137UA ✓ 啟用中規格比較
| 參數 | INA137UA | INA166UA |
|---|---|---|
| 品牌 | Texas Instruments | Texas Instruments |
| 類別 | Amplifier ICs | Amplifier ICs |
| 生命週期狀態 | 啟用中 | 最後購買 |
| Device Type | Audio differential line receiver IC (single channel) | — |
| Gain | -6 dB (G = 1/2) or +6 dB (G = 2), selected by resistor configuration | — |
| Number of Channels | 1 | — |
| 供應電壓 | +/-18 V maximum (36 V total) | [DATA_NEEDED: supply-voltage range] |
| 輸出類型 | Differential | Single-ended instrumentation-amplifier output |
| 封裝 | 8-pin SOIC (DBV) | SOIC-14 (D) |
| 安裝類型 | Surface mount | Surface mount |
| Manufacturer | Texas Instruments (Burr-Brown heritage) | — |
| Delivery Format | Tube (UA suffix) | — |
| Differential Input | Yes, balanced input pair (IN+ / IN-) | — |
| Common-Mode Rejection Ratio (CMRR) | [DATA_NEEDED: CMRR minimum/typical at DC and at frequency] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage typical and maximum] | 50 µV |
| 供應電流 | [DATA_NEEDED: quiescent supply current per amplifier] | [DATA_NEEDED: supply current] |
| Small-Signal Bandwidth | [DATA_NEEDED: bandwidth at G = 1/2 and G = 2] | — |
| Input Noise Density | [DATA_NEEDED: input voltage noise density] | — |
| Slew Rate | [DATA_NEEDED: slew rate] | 15 V/µs |
| 工作溫度範圍 | [DATA_NEEDED: operating junction/ambient temperature range] | — |
| RoHS 狀態 | [DATA_NEEDED: RoHS compliance statement] | unknown |
| Lead-Free | [DATA_NEEDED: lead-free / halogen-free statement] | — |
| Product Type | — | 1 circuit instrumentation amplifier |
| Internal Gain | — | 2000 V/V |
| External Gain Resistor | — | Not required |
| -3 dB Bandwidth | — | 450 kHz |
| Input Bias Current | — | 2.5 µA |
| Architecture | — | Current-feedback |
| Number of Circuits | — | 1 circuit |
| 腳位數 | — | 14 pins |
| 工作溫度 | — | -40 °C to +85 °C |
| Signal Type | — | Low-level differential input |
| Input Common-Mode Rejection | — | [DATA_NEEDED: input common-mode rejection ratio] |
| 雜訊密度 | — | [DATA_NEEDED: input noise density] |
| REACH Status | — | unknown |