INA148UA vs INA146UAG4 Vergleich
Detaillierter Direktvergleich von INA148UA von Texas Instruments und INA146UAG4 von Texas Instruments. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
Texas Instruments
INA146UAG4 - High-Voltage Programmable Gain Difference Amplifier | Texas Instruments
INA146UAG4 ✓ AktivSpezifikationsvergleich
| Parameter | INA148UA | INA146UAG4 |
|---|---|---|
| Marke | Texas Instruments | Texas Instruments |
| Kategorie | Amplifier ICs | Amplifier ICs |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Product Type | Precision unity-gain difference amplifier | High-Voltage Programmable Gain Difference Amplifier |
| Common-Mode Voltage Range | ±200 V | — |
| Differential Gain | 1 | — |
| Bandwidth | 100 kHz | — |
| Slew Rate | 1 V/µs | — |
| Input Offset Voltage | 5 mV | [DATA_NEEDED: input offset voltage] |
| Minimum Common-Mode Rejection Ratio | 70 dB | — |
| Minimum Supply Voltage | 2.7 V | — |
| Maximum Supply Voltage | 36 V | — |
| Minimum Operating Temperature | −55 °C | — |
| Maximum Operating Temperature | +125 °C | — |
| Amplifier Count | 1 | — |
| Internal Amplifier Implementation | Monolithic precision bipolar operational amplifier | — |
| Resistor Network | Thin-film resistor network | — |
| Gehäuse | 8-pin SOIC | 8-SOIC, 0.154 inch body width, 3.90 mm width |
| Montageart | Surface mount | — |
| Moisture Sensitivity Level | MSL 3, 168 hours | — |
| RoHS-Status | [DATA_NEEDED: RoHS compliance status] | [DATA_NEEDED: RoHS compliance status] |
| REACH Status | [DATA_NEEDED: REACH compliance status] | — |
| Amplifier Type | — | Differential amplifier |
| Number of Circuits | — | 1 circuit |
| Gain-Bandwidth Product | — | 550 kHz |
| Supply Type | — | Single or dual supply; exact limits not stated in the verified listings |
| Input Type | — | Differential input |
| Common-Mode Range | — | Extends beyond both supply rails |
| Input Protection | — | High-voltage capability provides inherent input protection |
| Ausgangstyp | — | Single-ended output |
| Gain Configuration | — | Programmable gain using an external gain-setting resistor |
| Operating Frequency | — | 550 kHz gain-bandwidth product |
| Differential Input Voltage | — | [DATA_NEEDED: maximum differential input voltage] |
| Common-Mode Input Voltage | — | [DATA_NEEDED: absolute maximum common-mode input voltage] |
| Supply Voltage Range | — | [DATA_NEEDED: supply voltage range] |
| Output Voltage Swing | — | [DATA_NEEDED: output voltage swing] |
| Input Bias Current | — | [DATA_NEEDED: input bias current] |
| Common-Mode Rejection | — | [DATA_NEEDED: common-mode rejection ratio] |
| Betriebstemperaturbereich | — | [DATA_NEEDED: operating temperature range] |